1·The shape of carbide formed with in grain depended on holding temperature.
晶内析出的碳化物形态与转变温度有关。
2·Holding temperature and time shall follow the requirements specified in Table 1.
保温温度和时间应遵照表1指定的要求。
3·Within 10 days, either the holding temperature or the turning egg (or not turning) had slight effect on the hatchability.
种蛋存放10天内，湿度偏高或偏低，以及是否翻蛋都对孵化率影响不大。
4·With the Copenhagen talks intent on holding temperature rises to 2c, Huq warned that further extreme weather events and disasters were inevitable.
对于哥本哈根谈判致力于控制气温升高2摄氏度，胡克警告说，更极端的气候事件和灾难不可避免。
5·Effect of mould holding temperature on the microstructure and mechanical properties of single crystal superalloy DD98 have been investigated.
研究了不同的型壳保温温度对一种铸造单晶高温合金dd 98铸态组织、热处理组织和持久性能的影响。
6·Objective To investigated the effects of different holding temperature on the metabolic activity, ultrastructure and patency of cryopreserved allograft arteries.
目的探讨不同维持温度对冷冻保存异体动脉内皮细胞代谢活性、超微结构和移植通畅率的影响。
7·In this study, the effects of plasticdeformation of the austenite phase and the holding temperature on thetransformation kinetics and the ferrite grain size are investigated.
研究了奥氏体相塑性变形和保温温度对相变动力学以及铁素体晶粒尺寸的影响。
8·In this paper, the heating temperature, THD heating rate, the holding temperature time and the cooling rate and so on were studied, and the direction to formulate technology parameters...
文中从加热温度，升温速度，保温时间，冷却速度等方面进行了分析研究，指出了退火工艺参数合理制订的方向。
9·When the preformed Magnesium alloy's texture was globalizing, there were two important control factors, which were holding temperature and holding time, affecting the globalization processing.
等温温度和保温时间是形变镁合金组织球状化的两个重要控制因素。
10·The results show that, with the increase of holding temperature, the amount of bainite and retained austenite, the carbon concentration in retained austenite first increases and then decreases.
结果表明，随等温温度的升高，贝氏体、残余奥氏体的量以及残余奥氏体中碳浓度先增加后减少。